Mobotix D12 Technické informace stáhnout pdf (Strana 70)

3.5 Starting the Camera With an Automatic IP Address (DHCP)

If your network has a DHCP server, you can start the camera with DHCP support. In

this case, the DHCP server automatically assigns an IP address.

As soon as startup has been completed, the camera automatically announces its

IP address, its network mask and its MAC address (note that this feature requires

an external speaker). Note that this announcement function can be deactivated

(Admin Menu> Loudspeaker and Microphone).

Proceed as follows to start the camera using DHCP:

• If the camera is powered on, disconnect the power supply of the camera by

unplugging the corresponding cable.

• Reconnect power to the camera and observe the LEDs.

• Wait until both LEDs are lighting up simultaneously for the first time.

• Press the "R" key on the camera within four seconds.

• After about two more seconds, the camera plays a sound twice ("Boing, Bo-

ing"), if an external speaker has been connected.

• After about another 15 seconds, the camera will announce its network data,

provided it has audio functionality.

You can now access the camera using the IP address it just announced and via

the list of Bonjour-enabled devices.

www.mobotix.com • [email protected]

68/76

M22M Camera Manual Part 1

Announce IP address:

Press "R" key

In case of an error, the

camera uses its last IP

address

Notes

Simply press the "R" key once if you would like to prompt a running

camera to announce its network settings.

Caution

When starting the camera with DHCP support, make sure that the net-

work has a properly functioning DHCP server. If this is not the case, the

camera cannot obtain a valid IP address and will fall back to its last

known IP address.

Press "R" key

"R" key

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 81 82

Žádné komentáře

Mobotix D12 Technické informace Strana 70