3.4 The First Image from the Camera
Once the Ethernet connection has been established, you have the following possibili-
ties to see the first image of the camera:
• Automatic camera search and configuration using MxControlCenter (free
Windows client for MOBOTIX cameras; section 3.4.7,
The First Image in MxCon-
trolCenter
)
• Manual configuration (section 3.4.1,
Preparing the Ethernet Connection
)
Besides using MxControlCenter, you can also use a browser to access the camera
(section 3.4.2,
The First Image in the Browser
).
In order to finish the camera configuration, you can use either MxControlCenter or
the browser-based user interface of the camera (see section 4.3,
The Live Screen in
the Browser
, in the
Software Manual
).
3.4.1 Preparing the Ethernet Connection
For this example, we will use a camera with the factory IP address 10.1.0.99. Re-
place this IP address with the IP address of your camera. You will find this address
on a small sticker on the camera. Accessing the camera is always the same and is
independent of the connection type: simply enter the camera's IP address in the ad-
dress field of the browser (see section 3.4.2,
The First Image in the Browser
).
Your computer has to have a network or a wireless interface, and it should be in the
same subnet as the camera. If your network also uses IP addresses of a class A net-
work (e.g. 10.x.x.x, network mask 255.0.0.0), you should be able to access
the camera directly (provided no other network device uses the same IP address).
Determine the IP address of your computer:
• Open a command shell
(Windows) or a terminal
(Linux/UNIX/OSX) and
enter the following com-
mand:
Windows 2000/XP: ipconfig
Linux/UNIX/OSX: ifconfig
You will find the IP address of your Windows computer under IP address; for Linux/
UNIX/OS X computers, search for the inet address parameter of the eth0 device (the
first network interface). If your computer does not use an IP address in the 10.x.x.x
range, you should change the network configuration of your computer or add a new
IP address (see below).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
52/76
M22M Camera Manual Part 1
Working with the web-
based user interface only
requires a web browser
with activated JavaScript!
Caution:
Netmask 255.0.0.0
Open a Command Prompt
(Windows):
Start> Run, enter "cmd",
then press [Return]
Note
Pressing the “R” key on the back of the camera will let the camera
announce the current IP address of the camera using its voice
output feature.
(164 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce