Mobotix D12 Technické informace stáhnout pdf (Strana 40)

2.8.4 After Mounting the Camera

Controlling the image position and the focus

• Loosen both screws at the turn/tilt joints of the mount using the supplied

Allen wrench (item1.3) so that you can easily turn and tilt the camera.

• Display the camera images on a computer monitor, then turn and tilt the

camera until you have found the best position.

• Tighten the screws at the turn/tilt joints of the SecureFlex mount using the

Allen wrench (maximum 4 Nm/2.95 lbf ft) to make sure that the position of

the camera remains as set.

• If required, clean the lens' surface using a clean, lint-free cotton cloth.

• Check the image focus (tele lens L135 only) and the camera position on the

computer monitor. Please also see section 2.9.3,

Changing Lenses

www.mobotix.com • [email protected]

38/76

M22M Camera Manual Part 1

Maximum torque for all

Allen screws: 4Nm

(2.95lbf ft)

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 81 82

Žádné komentáře

Mobotix D12 Technické informace Strana 40