3.2 Overview of the Configuration Settings
Once the connection has been established, you can configure the camera by clicking
on the Admin Menu button or the Setup Menu button.
• Using the Quick Installation wizard
After first booting the camera or after resetting it to factory defaults, any ac-
cess to the administration menu (Admin Menu button) will start the Quick
Installation.
The wizard will guide you through the most important settings of the camera
(configuration of the network interface, image control, etc.) and can also be
used to reset the camera to its factory settings.
It is also recommended to use Admin Menu> Quick Installation later on as
well, e.g. if you would like to change connection parameters or add a new
connection type.
• Administration and setup of the camera
Basic configuration tasks of the camera (e.g. passwords, interfaces, software
updates) are carried out from the administration menu (Admin Menu but-
ton), which requires the corresponding access rights (
admins
group, user
name and password).
Open the Setup Menu (button) and find the dialogs for changing the image,
event and recording settings in the Image Control and Event Control sec-
tions. These options are also available for users belonging to the
users
group. Some of these settings can be changed using the corresponding pull-
down menus above the image on the Live screen.
• The image settings are already optimized
The factory image settings of MOBOTIX cameras deliver excellent images for
most application scenarios and should not be changed. If you do wish to
make changes, your changes should be minor and gradual.
If you would like to reset changes without resetting the complete configura-
tion to factory defaults, you can use the Factory button at the bottom of the
dialog to reset only this dialog's settings. If you would like to reset all image
settings, you may do so using the Manage Settings> Restore Image Set-
tings pull-down menu above the image on the Live screen.
• All changes are temporary
All changes to the configuration are only temporary and can thus be tested
easily. Restoring the previous configuration settings can be achieved using
the Restore button in most dialogs or by running Admin Menu> Restore
last stored configuration from flash (see also section 5.9,
Managing Set-
tings
, in the
Software Manual
).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
46/76
M22M Camera Manual Part 1
Always use Quick Instal-
lation for initial configu-
ration!
Admin Menu
User: admin
Password: meinsm
Setup Menu
Recommendation: Always
use factory image set-
tings!
(164 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce