Mobotix D12 Technické informace stáhnout pdf (Strana 32)

2.7.4 Mounting the Camera over Wall Outlets

Mounting the SecureFlex mount to a wall allows covering RJ45 wall outlets (without

frame) and also allows using a defined network end point.

When positioning the wall outlet, make sure that the

outlet lines up with the upper rim of the mount later

on (see figure below and the drilling template at the

end of the manual).

If no wall outlet is present, use a suitable extension

or an adapter to connect the camera to the network.

When installing an above-the-wall assembly,

breaking out one of the four openings in the base of

the mount will provide for properly guiding the cable

into the mount.

www.mobotix.com • [email protected]

30/76

M22M Camera Manual Part 1

The wall mount has to

completely cover the wall

outlet

NET plug for Ethernet

cable

Wall outlet

CAT5 cable

MOBOTIX M22M

Use silicone

sealant!

Foot

Wall outlet

Caution

Always use the NET plug for connecting the Ethernet

cable!

Make sure that the plug is seated properly and

the connector is not bent or water may enter

the camera!

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 81 82

Žádné komentáře

Mobotix D12 Technické informace Strana 32