
92/118
T24 System Manual Part 2: System Expansion With MxEasy
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
4.2 Integrating Door Station Into Network With Static IP Addresses
If there is no DHCP server in the network or this is not to be used, all network devices
must have a static IP address in the same address range to be able to communicate with
one another. This also applies to the T24 and its remote stations, which are to be newly
integrated into the network (LAN – Local Area Network). You have to know the IP addresses
and subnet mask currently in use on the network.
A PC that is already configured to work on the network is necessary for configuration.
The MOBOTIX software MxEasy must be installed on this PC (free to download from
www.mobotix.com> Support).
Note
For Steps 4 and 5 described here, which must be carried out with MxEasy, please also
refer to Section 2.3.3 (Integrating An IP Video Door Station) in the MxEasy manual (free
to download from www.mobotix.com> Support> Manuals).
Configuration Comprises The Following Steps:
• Integrate T24 including remote stations into network
• Assign static IP addresses to videophones (on the videophone)
• Assign static IP address to operation PC (on PC)
• Assign static IP address to T24 (with MxEasy)
• Further configure T24 and initiate auto-configuration (with MxEasy)
• Set up supervisor PIN and admin card (on Keypad)
Step 1: Integrate T24 Including Remote Stations Into Network
Connect (one or more) T24, the videophones being used and, if not already done, a PC
with the router/switch into the network. Each T24 must have a (PoE) power supply.
Step 2: Assign Static IP Addresses To Videophones (On The Videophone)
Please note: The following settings refer to the menu of the Grandstream GXV3140 vid
-
eophone. The settings must be made in the relevant menus for IP videophones from
other manufacturers.
When first operating the Videophone, we recommend configuring the desired Menu
language on the display first:
• Menu > Personalize > Language > Select Language
Komentáře k této Příručce