Mobotix T24 Technické informace stáhnout pdf (Strana 76)

76/118

T24 System Manual Part 2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.6 Erase Contact (Doorbell/Voice Mailbox)

The steps described here are only available if you have created new contacts in the system

by setting up contact numbers.

Every setup contact number represents a contact and works like a telephone line to speciﬁc

user or user groups in the building. After the user has entered the contact number on the

keypad, the remote station(s) of the selected user(s) will ring, and/or their voice mailbox

will be accessed. You can set up up to 16 dierent contacts with contact numbers.

When a contact is erased from the system, the associated keypad button combinations

for ringing the bell and using the voice mailbox are also erased. Users whose user cards

were linked to a contact during setup (see 3.3.1) continue to have access to the building;

however, their voice mailbox and voice mailbox access data are erased from the system.

You require the red admin card to erase a contact or a contact number from the system.

Proceed As Follows:

1. Enter Conﬁguration Mode: Press the OK/MENU button until you hear the second

beep (button ﬂashes blue).

2. Hold your admin card up to the keypad buttons until you hear a beep and the

OK/MENU button lights up blue continuously.

3. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

4. Enter Erase Mode: Press the ESC/ALARM button until you hear the second beep

(button lights up blue).

hold (2nd beep)

ESC

hold (2nd beep)

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 119 120

Žádné komentáře

Mobotix T24 Technické informace Strana 76