Mobotix T24 Technické informace stáhnout pdf (Strana 38)

38/118

T24 System Manual Part 2: System Startup Without A PC

www.mobotix.com • [email protected]

Set Time:

1. Switching on Conﬁguration mode (again, if necessary): Press the OK/MENU button

until you hear the second beep (button ﬂashes blue).

2. Hold your admin card up to the keypad buttons until the OK/MENU button lights

up blue continuously.

3. Switching on Time mode: Press 8 until you hear the second beep and it ﬂashes

(reminder: The letter “t“ on the button stands for “time“).

4. Now enter the current time in the format hhmm (always four digits long): The

ﬁrst two digits indicate the hour and the next two digits indicate the minutes (for

example, 0804 = 8:04 a.m. and 2259 = 22:59 p.m.) Conﬁrm your entry by pressing

the OK/MENU button.

5. The respective number buttons on the keypad light up to show the time (hhmm)

that you have set. The time is also shown on the videophone display after several

minutes.

If you made a mistake when entering the time, repeat steps 1–5.

Note

After the time has been displayed, you remain in Keypad Conﬁguration mode for

60seconds, before this mode switches o automatically (if you do not press any more

buttons). Press the ESC/ALARM button to exit the mode immediately.

hold (2nd beep)

0 9

Time Code

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 119 120

Žádné komentáře

Mobotix T24 Technické informace Strana 38