Mobotix T24 Technické informace stáhnout pdf (Strana 39)

39/118

Step 2: Setting Up The Keypad

www.mobotix.com • [email protected]

Set Date:

1. Switching on Conﬁguration mode (again, if necessary): Press the OK/MENU button

until you hear the second beep (button ﬂashes blue).

2. Hold your admin card up to the keypad buttons until the OK/MENU button lights

up blue continuously.

3. Switching on Date mode: Press 3 until you hear the second beep and it ﬂashes

(reminder: The letter “d“ on the button stands for “date“).

4. Now enter the current date in the format yyyymmdd (always eight digits long):

The ﬁrst four digits represent the year (for example, 2012), the next two digits

represent the month (01 for January through to 12 for December) and the last two

digits represent the day (01 to 31). Conﬁrm your entry by pressing the OK/MENU

button.

The respective number buttons on the keypad light up to show the date (yyyymmdd)

that you have set. The date is also shown on the videophone display after several

minutes.

If you made a mistake when entering the time, repeat steps 1–5.

Note

After the date has been displayed, you remain in Keypad Conﬁguration mode for

60seconds, before this mode switches o automatically (if you do not press any more

buttons). Press the ESC/ALARM button to exit the mode immediately.

hold (2nd beep)

0 9

Time Code

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Žádné komentáře

Mobotix T24 Technické informace Strana 39