
79/118
Change Super PIN Using The Keypad
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
5. Enter old Super PIN once: Enter the old Super PIN and briefly press the OK/MENU
button (the button’s flashing pattern will change). Please note: If the module
software of your keypad (T24-KeypadRFID) is release number 1.0.1.4 or older, you
do not need to enter the old Super PIN. Proceed to step6.
6. Enter new Super PIN twice: Enter the new Super PIN and briefly press the
OK/MENU button (the button’s flashing pattern will change). Re-enter the new
Super PIN for confirmation and briefly press the OK/MENU button (button lights
up white). A beep sounds and the keypad displays a flashing ring pattern.
7. As soon as the pattern stops flashing, the new Super PIN has been changed. You
are now back in configuration mode (the OK/MENU button lights up blue). Press
the ESC/ALARM button to exit. After 60 seconds, the mode is exited automatically.
Note
In case of a wrong entry, cancellation of entry via the ESC/ALARM button, or a delay
of more than 60 seconds, a low warning tone is sounded and the system reverts to
the regular operating mode (all buttons light up white). If required, re-enter into Add
mode as described above.
0 9
Super PIN old
OK
0 9
Super PIN new
OK
0 9
Super PIN new
OK
ESC
Komentáře k této Příručce