Mobotix MX-D25M-SEC-D76 Specifikace Strana 87

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 140
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 86
87/140
Replacing the MicroSD Card
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.8.2 Inserting a MicroSD Card
1. Insert the MicroSD card: Push the MicroSD card into the
card slot as shown, until an audible and perceptible click
indicates it is in place.
Remove the camera dome. Take the delivered plastic foil
or a cotton cloth, insert the dome into its seat and turn it in
clockwise direction.
Attach the outer shell: Place the outer shell onto the camera
and tighten all four Allen screws using the supplied Allen
wrench. Make sure that the rubber seal is seated properly.
Activate recording: If you have inserted a MicroSD card that has already been MxFFS
formatted, you can activate recording under Admin Menu> Storage on External
File Server/ Flash Device. Once the camera has been rebooted, it automatically
activates recording.
If you are using a new MicroSD card, it must first be formatted as described in
Section 3.5, «MicroSD Card Recording»
,.
Push-push operation:
insert the MicroSD card
and push it in gently
Click!
Zobrazit stránku 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 139 140

Komentáře k této Příručce

Žádné komentáře