Mobotix MX-KEYPAD1-EXT-SV Technické informace Strana 82

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 150
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 81
82/148
T24 System Manual Part 1: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Network Connection Via Mx2wire+ Technology
An Ethernet terminal board is not required for the T24 door station with Mx2wire+ technology.
Instead, the camera module is connected to the T24-Info2wire+ info module via a MOBOTIX
patch cable.
1. Ensure that the seal is fitted to the camera module.
2. Remove the pre-installed camera module patch
cable and instead insert the supplied, longer patch
cable into the camera housing. Make sure that
the blue rubber sealing ring is in the correct nal
position.
3. Feed the MxBus two-wire cable from the camera
(installation as described in Section 2.4.1) together
with the newly fitted patch cable into the housing
and under the frame, so that the MxBus cable can
be fastened to the keypad board and the patch cable
to the info module.
Seal
Attach the longer patch cable for the T24-Info2wire+
info module
Zobrazit stránku 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 149 150

Komentáře k této Příručce

Žádné komentáře