Mobotix MX-KEYPAD1-EXT-SV Technické informace stáhnout pdf (Strana 103)

103/148

Installing The T24-DoorMaster

www.mobotix.com • [email protected]

2.5.4 Installation Using Cavity Or In-Wall Socket

1. Prepare all the required cabling and the cavity or in-wall socket: See previous

sections.

Remove the battery pack, connect the connector (A),

guide the cable under the battery pack and replace

the battery pack (B). The red LED indicates that the

battery is low.

3. Screw on the MxBus cable (coming from the T24

door station):

• Red wire to MX + terminal

• Blue wire to MX - terminal

When extending the MxBus cable, make sure the polarity

is correct (+/-).

4. Screw on the anti-theft protection (coming from

the T24 door station):

• First wire to OUT 1+ terminal

• Second wire to OUT - terminal

The device still functions properly if the wires are

swapped.

5. Screw on the electric door opener (coming from the

door):

• First wire to OUT 2+ terminal

• Second wire also to OUT - terminal

The device still functions properly if the wires are

swapped.

L$)"7$ *>>#"0&)*+$<4

c )) "( &'23<*+&"' (#")

*<< +5$ 1*/<$2 32$;

K)>"#+*'+, D$$ +5$

1"''$1+&"' ">+&"'2

' D$1+&"' 9.:.9

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 149 150

Žádné komentáře

Mobotix MX-KEYPAD1-EXT-SV Technické informace Strana 103